3D shapes are solids that consist of 3 dimensions  length, breadth (width), and height. 3D in the word 3D shapes means threedimensional. Every 3D geometric shape occupies some space based on its dimensions and we can see many 3D shapes all around us in our daytoday life. Some examples of 3D shapes are cube, cuboid, cone, and cylinder.
1.  What are 3D Shapes? 
2.  Types of 3D Shapes 
3.  Properties of 3D Shapes 
4.  3D Shapes Formulas 
5.  3D Shapes  Faces, Edges, Vertices 
6.  3D Shapes Nets 
7.  FAQs on 3D Shapes 
What are 3D Shapes?
3D shapes are solid shapes or objects that have three dimensions (which are length, width, and height), as opposed to twodimensional objects which have only a length and a width. Other important terms associated with 3D geometric shapes are faces, edges, and vertices. They have depth and so they occupy some volume. Some 3D shapes have their bases or crosssections as 2D shapes. For example, a cube has all its faces in the shape of a square. Let us now learn about each 3dimensional shape (3D shape) in detail. 3D shapes are classified into several categories. Some of them have curved surfaces; some are in the shape of pyramids or prisms.
RealLife Examples of 3D Geometric Shapes
In mathematics, we study 3dimensional objects in the concept of solids and try to apply them in real life. Some reallife examples of 3D shapes are shown below which are a soccer ball, a cube, a bucket, and a book.
Types of 3D Shapes
There are many 3 dimensional shapes (3D shapes) that have different bases, volumes, and surface areas. Let us discuss each one of them.
Sphere
A sphere is round in shape. It is a 3D geometric shape that has all the points on its surface that are equidistant from its center. Our planet Earth resembles a sphere, but it is not a sphere. The shape of our planet is a spheroid. A spheroid resembles a sphere but the radius of a spheroid from the center to the surface is not the same at all points. Some important characteristics of a sphere are as follows.
 It is shaped like a ball and is perfectly symmetrical.
 It has a radius, diameter, circumference, volume, and surface area.
 Every point on the sphere is at an equal distance from the center.
 It has one face, no edges, and no vertices.
 It is not a polyhedron since it does not have flat faces.
Cube and Cuboid
Cube and cuboid are threedimensional shapes (3D shapes) that have the same number of faces, vertices, and edges. The main difference between a cube and a cuboid is that in a cube, all its six faces are squares and in a cuboid, all its six faces are rectangles. A cube and a cuboid occupy different volumes and have different surface areas. The length, width, and height of a cube are the same, while for a cuboid, length, height, and width are different.
Cylinder
A cylinder is a 3D shape that has two circular faces, one at the top and one at the bottom, and one curved surface. A cylinder has a height and a radius. The height of a cylinder is the perpendicular distance between the top and bottom faces. Some important features of a cylinder are listed below.
 It has one curved face.
 The shape stays the same from the base to the top.
 It is a threedimensional object with two identical ends that are either circular or oval.
 A cylinder in which both the circular bases lie on the same line is called a right cylinder. A cylinder in which one base is placed away from another is called an oblique cylinder.
Cone
A cone is another threedimensional shape (3D shape) that has a flat base (which is of circular shape) and a pointed tip at the top. The pointed end at the top of the cone is called 'Apex'. A cone also has a curved surface. Similar to a cylinder, a cone can also be classified as a right circular cone and an oblique cone.
 A cone has a circular or oval base with an apex (vertex).
 A cone is a rotated triangle.
 Based on how the apex is aligned to the center of the base, a right cone or an oblique cone is formed.
 A cone in which the apex (or the pointed tip) is perpendicular to the base is called a right circular cone. A cone in which the apex lies anywhere away from the center of the base is called an oblique cone.
 A cone has a height and a radius. Apart from the height, a cone has a slant height, which is the distance between the apex and any point on the circumference of the circular base of the cone.
Torus
A torus is a 3D shape. It is formed by revolving a smaller circle of radius (r) around a larger circle with a bigger radius (R) in a threedimensional space.
 A torus is a regular ring, shaped like a tire or doughnut.
 It has no edges or vertices.
Pyramid
A pyramid is a polyhedron with a polygon base and an apex with straight edges and flat faces. Based on their apex alignment with the center of the base, they can be classified into regular and oblique pyramids.
 A pyramid with a triangular base is called a Tetrahedron.
 A pyramid with a quadrilateral base is called a square pyramid.
 A pyramid with the base of a pentagon is called a pentagonal pyramid.
 A pyramid with the base of a regular hexagon is called a hexagonal pyramid.
Prisms
Prisms are solids with identical polygon ends and flat parallelogram sides. Some of the characteristics of a prism are:
 It has the same crosssection all along its length.
 The different types of prisms are  triangular prisms, square prisms, pentagonal prisms, hexagonal prisms, and so on.
 Prisms are also broadly classified into regular prisms and oblique prisms.
Now, let us learn about 3dimensional shapes that are platonic solids.
Polyhedrons
A polyhedron is a 3D shape that has polygonal faces like (triangle, square, hexagon) with straight edges and vertices. It is also called a platonic solid. There are five regular polyhedrons. A regular polyhedron means that all the faces are the same. For example, a cube has all its faces in the shape of a square. Some more examples of regular polyhedrons are given below:
 A Tetrahedron has four equilateraltriangular faces.
 An Octahedron has eight equilateraltriangular faces.
 A Dodecahedron has twelve regular pentagon faces.
 An Icosahedron has twenty equilateraltriangular faces.
 A Cube has six square faces.
Properties of 3D Shapes
Every 3D shape has some properties which help us to identify them easily. Let us discuss each of them briefly.
3D Shapes  Properties 

Sphere (With radius  r) 

Cylinder 

Cone 

Cube 

Cuboid 

Prism 

Pyramid 

3D Shapes Formulas
As discussed, all 3 Dimensional shapes have a surface area and volume. The surface area is the area covered by the 3D shape at the bottom, top, and all the faces including the curved surfaces, if any. Volume is defined as the amount of space occupied by a 3D shape. Every threedimensional shape (3D shape) has different surface areas and volumes. The following table shows different 3D shapes and their formulas.
3D Shape  Formulas 

Sphere  Diameter = 2 × r; (where 'r' is the radius) Surface Area = 4πr^{2} Volume = (4/3)πr^{3 } 
Cylinder  Total Surface Area = 2πr(h+r); (where 'r' is the radius and 'h' is the height of the cylinder) Volume = πr^{2}h 
Cone  Curved Surface Area = πrl; (where 'l' is the slant height and l = √(h^{2} + r^{2})) Total Surface Area = πr(l + r) Volume = (1/3)πr^{2}h 
Cube  Lateral Surface Area = 4a^{2}; (where 'a' is the side length of the cube) Total Surface Area = 6a^{2} Volume = a^{3} 
Cuboid  Lateral Surface Area = 2h(l + w); (where 'h' is the height, 'l' is the length and 'w' is the width) Total Surface Area = 2 (lw + wh + lh) Volume = (l × w × h) 
Prism  Surface Area = [(2 × Base Area) + (Perimeter × Height)] Volume = (Base Area × Height) 
Pyramid  Surface Area = Base Area + (1/2 × Perimeter × Slant Height) Volume = [(1/3) × Base Area × Altitude] 
3D Shapes  Faces Edges Vertices
As mentioned earlier, 3D shapes and objects are different from 2D shapes and objects because of the presence of the three dimensions  length, width (breadth), and height. As a result of these three dimensions, these objects have faces, edges, and vertices. Observe the figure given below to identify the face, vertex, and edge of a 3D shape.
Faces
 A face refers to any single flat or curved surface of a solid object.
 3D shapes can have more than one face.
Edges
 An edge is a line segment on the boundary joining one vertex (corner point) to another.
 They serve as the junction of two faces.
Vertices
 A point where two or more lines meet is called a vertex.
 It is a corner.
 The point of intersection of edges denotes the vertices.
The following table shows the faces, edges, and vertices of a few 3dimensional shapes (3D shapes).
3D shapes  Faces  Edges  Vertices 

Sphere  1  0  0 
Cylinder  3  2  0 
Cone  2  1  1 
Cube  6  12  8 
Rectangular Prism  6  12  8 
Triangular Prism  5  9  6 
Pentagonal Prism  7  15  10 
Hexagonal Prism  8  18  12 
Square Pyramid  5  8  5 
Triangular Pyramid  4  6  4 
Pentagonal Pyramid  6  10  6 
Hexagonal Pyramid  7  12  7 
3D Shapes Nets
We can understand the threedimensional shapes and their properties by using nets. A 2dimensional shape that can be folded to form a 3dimensional object is known as a geometrical net. A solid may have different nets. In simple words, the net is an unfolded form of a 3D figure. Observe the following figure to see the nets that are folded to make a 3D shape.
☛ Related Topics:
 Closed Shapes
 Plane Shapes
 Visualizing Solid Shapes
 Oval Shape
Cuemath is one of the world's leading math learning platforms that offers LIVE 1to1 online math classes for grades K12. Our mission is to transform the way children learn math, to help them excel in school and competitive exams. Our expert tutors conduct 2 or more live classes per week, at a pace that matches the child's learning needs.
FAQs on 3D Shapes
What are 3D Shapes?
A shape or a solid that has three dimensions is called a 3D shape. 3D shapes have faces, edges, and vertices. They have a surface area that includes the area of all their faces. The space occupied by these shapes gives their volume. Some examples of 3D shapes are cube, cuboid, cone, cylinder. We can see many realworld objects around us that resemble a 3D shape. For example, a book, a birthday hat, a coke tin are some reallife examples of 3D shapes.
What is a Face, Edge, and a Vertex in a 3D Shape?
A very important feature of a 3D shape is its face, vertex, and edge. Generally, the face of a 3D shape is a polygonshaped flat surface. A 3D shape has more than one face except for a sphere. A vertex is a sharppointed corner. Edge is a line segment or the distance between two adjacent vertices of a 3D shape. Different 3D shapes have different numbers of faces, vertices, and edges. For example, a cube is a 3D shape that has 6 faces, 12 edges, and 8 vertices.
Does a 3D Geometric Shape Only Have a Flat Surface?
No, a 3D shape may have flat surfaces as well as curved surfaces. For example, a cone and a cylinder, have flat surfaces of a circle as well as curved surfaces.
What is the Difference Between 2D and 3D Shapes?
The differences between a 2D shape and a 3D shape are given as follows.
 2D shapes have a length and a width, whereas, 3D shapes have a length, a width, and a height.
 2D shapes have an area, they do not occupy any volume, whereas 3D shapes have a surface area and a volume.
 Examples of 2D shapes are triangle, square, rectangle, and examples of 3D shapes are cube, cuboid, prism.
What is the Surface Area and Volume of a 3D Shape?
Surface area means the area of all the individual faces of the 3D shape. All the 3D shapes have some depth. The space inside a 3D shape is called its volume.
What is the Difference Between Lateral Surface Area and Curved Surface Area of a 3D Shape?
Lateral surface area means the area of all the surfaces of the 3D shape excluding the top and the bottom surfaces. The curved surface area includes the area of only the curved surface in a 3D shape. For example, a cube has 6 flat faces. Its lateral surface area includes the area of all 4 faces excluding the top and the bottom face. A cylinder has two flat faces and one curved surface. So its curved surface area is the area of the curved part between the top and bottom faces which are circular in shape.
Which 3D Shape has No Flat Face, Edge, or Vertex but Only One Curved Surface?
A sphere is a 3D shape that has no flat face, edges, or vertices. It has only one curved surface. The surface area of a sphere is calculated with the help of the formula, Surface area of sphere = 4πr^{2}. A torus is another shape that does not have a flat face, edge, or vertex. It is in the shape of a ring. It is formed by revolving a smaller circle around a larger circle in a threedimensional space.
What are the Common Properties of 3D Geometric Shapes?
The common properties of 3D shapes are as follows.
 3D shapes have a length, width, and height. A sphere is exceptional as it does not have these three dimensions, but it extends in three directions.
 3D shapes may or may not have faces, vertices, edges, and curved surfaces.
 The faces of most of the 3D shapes are polygons like a triangle, square, rectangle.
What can a 3D Shape also be Called?
In geometry, a threedimensional shape can also be called a solid shape.
What Objects are 3D Shapes?
The objects that are threedimensional with length, breadth, and height defined are known as 3D Shapes. A few examples of 3D shapes are a dice which is in the form of a cube, a shoe box which is in the form of a cuboid or rectangular prism, an ice cream cone which is in the form of a cone, a globe which is in the form of a sphere.
What is the Volume of a 3D Shape?
The volume of 3D Shapes refers to the amount of cubic space filled within the shapes. To find the volume, we need the measurement of the three dimensions. The calculations of the volume of 3D shapes become easier if we know the formula of each shape.